所有的产物在成型后都必要对它们停止一些有用的处置，起首咱们必要对其外表层停止处置，只要外表层处置适合才能使它的寿命延伸，而且提高机能。

All products must undergo some useful treatment after molding. Firstly, we need to stop treating their outer layer, as long as the treatment is appropriate, in order to extend their lifespan and improve their functionality.

喷涂与电镀处置是机箱机柜外面处置.常使用的方法，它的感化是防锈、防静电，同时还可以构成一层保护膜。当并非机箱机柜所有格的外面都要做喷涂和电镀处置。一样平常优良机箱机柜外部较少做漆化。

Spraying and electroplating treatment are external treatments for chassis and cabinets The commonly used method has the effects of rust prevention, anti-static, and can also form a protective film. When the outside of the chassis cabinet is not the only compartment, it needs to be treated with spraying and electroplating. Normally, there is less paint applied to the exterior of high-quality computer cases and cabinets.

不仅仅是机箱机柜外面处置，良好的散热性对付机箱机柜来讲也是异常重要的。但是机箱机柜的散热离不开电扇，经由过程你放入装备发热量的巨细来斟酌电扇的设置装备摆设。平日来讲，机箱机柜顶部都有两到四个电扇,侧壁电扇应安装在机箱机柜后壁，为何要这样做呢，其缘故原由是装备后部会发生大批热量为了实时把热量排挤以是要再侧壁电扇安装在机箱机柜后壁。

Not only is it important to dispose of the outside of the chassis and cabinet, but also to have good heat dissipation for the chassis and cabinet. However, the heat dissipation of the chassis and cabinet cannot be separated from the electric fan. Through the process, you need to carefully consider the size of the equipment's heat generation to determine the setting and layout of the electric fan. On weekdays, there are two to four electric fans on the top of the chassis and cabinet. The side wall electric fans should be installed on the back wall of the chassis and cabinet. The reason for this is that a large amount of heat is generated at the rear of the equipment. In order to dissipate the heat in real time, the side wall electric fans need to be installed on the back wall of the chassis and cabinet.

外表层处置和散热性处置对付机箱机柜来讲都是分外重要的，这两样做好了对配电箱来讲机能会更强

The treatment of the outer layer and heat dissipation is particularly important for the chassis and cabinets. If these two are done well, the functionality of the distribution box will be stronger