抽屉的操作方法

　　Operation method of drawer

　　1.在推入开关前，确保开关柜的开关手柄在“到位/远”的正确位置，开关手柄的值在“off”位置，抽屉位置手柄在“low up (out)”位置，断路器操作手柄位于“O”位置。

　　Before pushing in the switch, ensure that the switch handle of the switchgear is in the correct position of "in place/far", the value of the switch handle is in the "off" position, the drawer position handle is in the "low up (out)" position, and the circuit breaker operating handle is in the "O" position.

　　2.用双手握住开关箱下面的两个把手，慢慢地按下开关箱。

　　2. Hold the two handles under the switch box with both hands and slowly press down on the switch box.

　　3.当开关柜离满推距离约4-5cm时，用双手快速将开关柜推入。

　　When the switch cabinet is about 4-5cm away from full push, quickly push the switch cabinet in with both hands.

　　4.检查开关柜是否被完全推入:检查开关柜与箱体是否紧密配合，就可以知道开关柜是否被完全推入。

　　4. Check if the switchgear has been fully pushed in: Check if the switchgear is tightly fitted to the box to determine if the switchgear has been fully pushed in.

　　抽屉操作注意事项:

　　Drawer operation precautions:

　　1.推入开关柜必须双手操作，防止单手操作造成开关柜左右偏转，甚破坏第二个插件，造成损坏。

　　1. Pushing into the switchgear must be done with both hands to prevent one handed operation from causing the switchgear to deflect left and right, or even damaging the second plug, resulting in damage.

　　2.在上面的第三个步骤中，轻轻缓慢地推入开关柜，可能会导致插电失败一两次，导致插电过度加热或开关无法启动。

　　In the third step above, gently and slowly pushing in the switch cabinet may result in one or two failed plug ins, causing overheating or the switch to fail to start.

　　本文由 山东MNS低压抽屉柜 友情奉献.更多有关的知识请点击  http://www.tongyuhengcheng.com/   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Shandong MNS low-voltage drawer cabinet For more related knowledge, please click http://www.tongyuhengcheng.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned