机箱机柜指通过钣金加工设备（激光切割机、发泡机、数控冲床、折弯机等）加工而成的箱柜。机箱机柜适用领域广泛，现在的厂家也不是单一的只是加工机箱机柜了，有的厂家开始自己配线，配电。

　　The chassis cabinet refers to a cabinet made by sheet metal processing equipment (laser cutting machine, foaming machine, CNC punching machine, bending machine, etc.). Chassis cabinets are widely used in various fields, and now manufacturers are not just processing chassis cabinets. Some manufacturers have started to wire and distribute power themselves.

　　1.jpg

　　1.jpg

　　机箱机柜的作用有三个方面：

　　The functions of a chassis cabinet are threefold:

　　，它提供空间给电源、主机板、各种扩展板卡、软盘驱动器、光盘驱动器、硬盘驱动器等存储设备，并通过机箱内部的支撑、支架、各种螺丝或卡子夹子等连接件将这些零配件牢固固定在机箱内部，形成一个集约型的整体。

　　Firstly, it provides space for storage devices such as power supplies, motherboards, various expansion boards, floppy disk drives, optical disk drives, hard disk drives, etc., and securely fixes these components inside the chassis through internal supports, brackets, various screws or clips, forming a compact whole.

　　其次，它坚实的外壳保护着板卡、电源及存储设备，能防压、防冲击、防尘，并且它还能施展防电磁干扰、辐射的功能，起屏蔽电磁辐射的作用。

　　Secondly, its sturdy casing protects the board, power supply, and storage devices, providing anti pressure, anti impact, and dust-proof protection. Additionally, it can also perform anti electromagnetic interference and radiation functions, shielding electromagnetic radiation.

　　再次，它还提供了很多便于使用的面板开关指示灯等，让操纵者更利便地操作微机或观察微机的运行情况。我们了解机箱机柜，让机箱机柜很好的为我们服务。

　　Again, it also provides many user-friendly panel switches, indicator lights, etc., making it easier for operators to operate or observe the operation of the microcomputer. We understand chassis cabinets and make them serve us well.

　　机箱机柜的品质直接受制造工艺的好坏的影响，工艺较高机箱的钢板边沿不会泛起毛边、锐口、毛刺等现象，并且裸露的边角都经由折边处理，不易划伤装机者的手。各个插卡槽位的定位也都相称精确，不会泛起配件安装不上或者错位的尴尬情况。

　　The quality of the chassis and cabinet is directly affected by the quality of the manufacturing process. The steel plate edges of the chassis with higher technology will not have burrs, sharp edges, or burrs, and the exposed corners are all folded to prevent scratching the hands of the installer. The positioning of each card slot is also equally accurate, avoiding awkward situations where accessories cannot be installed or misplaced.

　　机箱机柜设计特性

　　Design characteristics of chassis and cabinet

　　1、采用不锈钢门轴，双源专用端子箱把手，用箱门内部装有限位和防反弹机构;

　　1. Adopting stainless steel door shaft, dual source dedicated terminal box handle, and equipped with limit and anti rebound mechanism inside the box door;

　　2、引线敲落孔改进为"工"字型可拆卸结构，方便了电缆的引入;

　　2. The lead knock off hole has been improved to an "I" - shaped detachable structure, which facilitates the introduction of cables;

　　3、箱体采用进口不锈钢材料制作，强度好、硬度高、表面美观、密封性好、抗腐蚀性强、寿命长、易维护，设计特性箱体采用进口不锈钢材料制作，强度好、硬度高、表面美观、密封性好、抗腐蚀性强、寿命长、易维护，是普通端子箱配电箱、动力箱理想的换代产品和上等级产品。

　　3. The box body is made of imported stainless steel material, which has good strength, high hardness, beautiful surface, good sealing, strong corrosion resistance, long service life, and easy maintenance. The design features of the box body are that it is made of imported stainless steel material, which has good strength, high hardness, beautiful surface, good sealing, strong corrosion resistance, long service life, and easy maintenance. It is the most ideal replacement product and upper grade product for ordinary terminal box distribution boxes and power boxes.

　　3.jpg

　　3.jpg

　　七个要点判断机箱机柜的好孬：

　　Seven key points to judge the quality of a chassis cabinet:

　　1、看钢板，钢板一定要厚，你用手指敲一下，就能感觉到哪些厚哪些薄了。

　　1. Look at the steel plate, it must be thick. You can feel which ones are thicker and which ones are thinner by tapping with your fingers.

　　2、看喷漆，一个合格的机柜，所有的钢材都需要喷漆，而且喷漆一定要平均，这样才能良好地防锈、防尘等。

　　2. Looking at painting, a qualified cabinet requires all steel to be painted, and the painting must be even in order to effectively prevent rust and dust.

　　3、看架构布局，一般来说，挡板要多，而且具有散热孔，一些用来固定线缆的铁皮要包边，预防损坏线缆。侧壁风扇应安装在机柜后壁，由于设备后部产生大多数的热量。

　　3. Looking at the architecture layout, generally speaking, there should be more baffles with heat dissipation holes, and some iron sheets used to fix cables should be wrapped to prevent damage to the cables. The side wall fan should be installed on the back wall of the cabinet, as most of the heat is generated at the rear of the equipment.

　　4、看配件，因为安装中包括网络电缆、电信电缆和电源电缆，需要购买钩环带或带齿的带子来有效地把电缆有序的固定在机柜里面。假如机柜带有电缆治理模块使电缆可以直接固定在垂直安装轨内，则再好不外。

　　4. Looking at the accessories, as the installation includes network cables, telecommunications cables, and power cables, it is necessary to purchase hook and loop or toothed straps to effectively fix the cables in an orderly manner inside the cabinet. If the cabinet is equipped with a cable management module that allows cables to be directly fixed in the vertical installation track, it would be great.

　　5、看玻璃，玻璃一定要厚一点的，还要留意玻璃的周边是否有裂缝，假如有裂缝，就意味着有隐患了，还有要留意是否棘手。 6、看功能：考虑的应是性。

　　5. When looking at glass, it must be thicker and pay attention to whether there are cracks around the glass. If there are cracks, it means there are hidden dangers, and it is also important to pay attention to whether it is difficult. 6. When it comes to functionality, the first consideration should be security.

　　7、看散热，估计一下你的设备发热量有多大，一般来说，柜顶都有二到四个风扇，风扇都是多多益善的啦。还有一些用来固定机架的螺丝、螺母等，也要足量。不因日后扩展而带来配件不足的麻烦。

　　7. Looking at the heat dissipation, estimate how much heat your device generates. Generally speaking, there are two to four fans on the top of the cabinet, and the more fans there are, the better. There are also some screws, nuts, etc. used to fix the rack, which should be sufficient. Not causing the trouble of insufficient accessories due to future expansion.

　　2.jpg

　　2.jpg

　　随着工业4.0和制造2025的进程，在钣金机箱机柜加工市场激烈的竞争中，多样化、定制化是未来产品的发展趋势，柔性化、自动化和智能化生产是企业改造升级的方向。提高系统性的解决方案水平和集成化生产能力是提高企业利润和扩大企业生存空间的关键。机箱机柜作为制造业，面临的加工难题依旧是材料的浪费和时间的消耗。如今，再加上市场对产品美观性要求日益增多，复杂性程度也在提高、产品推陈出新速度加快，传统的加工方式显然力不从心。

　　With the progress of Industry 4.0 and Made in China 2025, in the fierce competition of the sheet metal chassis and cabinet processing market, diversification and customization are the development trends of future products, and flexible, automated, and intelligent production are the directions for enterprise transformation and upgrading. Improving the level of systematic solutions and integrated production capacity is the key to increasing enterprise profits and expanding their survival space. As a manufacturing industry, the biggest processing challenge faced by chassis cabinets is still the waste of materials and time consumption. Nowadays, coupled with the increasing demand for product aesthetics in the market, the level of complexity is also increasing, and the speed of product innovation is accelerating. Traditional processing methods are clearly inadequate.

　　那么，如何保证在有限的时间内制作更多更好的产品，这就是新型加工技术——高速的优势，与普通机床相比，高速CNC有如下特点:

　　So, how to ensure the production of more and better products in a limited time is the advantage of the new machining technology - high-speed. Compared with ordinary machine tools, high-speed CNC has the following characteristics:

　　●加工精度高，具有稳定的加工质量;

　　High processing accuracy and stable processing quality;

　　●可进行多坐标的联动，能加工形状复杂的零件;

　　● Can perform multi coordinate linkage and process complex shaped parts;

　　●加工零件改变时，一般只需要更改数控程序，可节省生产准备时间;

　　When processing parts, it is generally only necessary to change the CNC program, which can save production preparation time;

　　●机床本身的精度高、刚性大，可选择有利的加工用量，生产率高(一般为普通机床的3~5倍);

　　The machine tool itself has high precision and rigidity, and can choose favorable processing quantities, resulting in high productivity (generally 3-5 times that of ordinary machine tools);

　　●机床自动化程度高，可以减轻劳动强度;

　　The high degree of automation of machine tools can reduce labor intensity;

　　●对操作人员的素质要求较高，对维修人员的技术要求更高。

　　The quality requirements for operators are higher, and the technical requirements for maintenance personnel are higher.

　　真空吸附，省人力，整版加工，直接成型，以设备代替人工，节省用工成本，板材达90%利用率，带刀库，自动换刀，真空吸附，产品中间不会变形，小的圆弧角0.25。

　　Vacuum adsorption, labor-saving, whole plate processing, direct molding, replacing manual labor with equipment, saving labor costs, achieving a 90% utilization rate of sheet metal, with a tool magazine, automatic tool changing, vacuum adsorption, no deformation in the middle of the product, and a minimum arc angle of 0.25.

　　本文由 山东机箱机柜  友情奉献.更多有关的知识请点击  http://www.tongyuhengcheng.com/   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Shandong Chassis Cabinet For more related knowledge, please click http://www.tongyuhengcheng.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.