您好,欢迎来到济南通宇恒成自动化工程有限公司网站!

服务热线

当前位置: 首页- 新闻中心 > 公司动态
常见问题
新闻中心

济南MNS低压抽屉柜:成套软启动控制柜结构特点

发布时间:2023-11-14 来源:http://www.tongyuhengcheng.com/ 浏览量:

成套软启动控制柜是以软起动器为控制主体,并配以相应规格的接触器组装成控制柜,实现三相交流鼠笼式异步电动机的软起动、软停止功能,同时具有过载、过流、缺相、三相不平衡、过压、欠压等多项保护功能。广泛应用于冶金、石油、化工、机械、供水、市政、水泥、等行业,是传统Y/△起动、自耦降压起动等理想的替换产品。
The complete set of soft start control cabinet is composed of a soft starter as the main control body and corresponding specifications of contactors to achieve the soft start and soft stop functions of three-phase AC squirrel cage asynchronous motor. It also has multiple protection functions such as overload, overcurrent, phase loss, three-phase imbalance, overvoltage, undervoltage, etc. Widely used in industries such as metallurgy, petroleum, chemical industry, machinery, water supply, municipal engineering, cement, etc., it is an ideal replacement product for traditional Y/△ starting, self coupling voltage reduction starting, and other industries.
成套软启动控制柜主要降低电动机的起动电流,减小配电容量,避免增容投资,减小起动应力,延长电动机及相关设备的使用寿命。具有多种起动模式和宽范围的电流、电压等设定,可适应多种负载情况。配有主回路进线断路器,旁路接触器于一体,用于实现电动机的多重控制保护。同时还有起动、停止按钮及运行、停止、故障指示和预留远控接点。远控接点有起停输入接点,运行输出接点,故障输出接点(均为无源继电器接点),计算机通讯接口供上位机控制和管理之用。
The complete set of soft start control cabinet mainly reduces the starting current of the motor, reduces the distribution capacity, avoids capacity increase investment, reduces starting stress, and extends the service life of the motor and related equipment. It has multiple starting modes and a wide range of current, voltage, and other settings, which can adapt to various load conditions. Equipped with a main circuit breaker and a bypass contactor, it is used to achieve multiple control and protection of the motor. At the same time, there are start and stop buttons, operation, stop, fault indication, and reserved remote control contacts. Remote control contacts include start stop input contacts, operation output contacts, fault output contacts (all passive relay contacts), and computer communication interfaces for upper computer control and management.
济南MNS低压抽屉柜
成套软启动控制柜结构特点:
Structural characteristics of the complete set of soft start control cabinet:
起动时间可预置,根据负载类型不同设定不同的起动时间;
The starting time can be preset, and different starting times can be set according to different load types;
一拖多台功能,一台软起动装置可依次起动多台电机;
One drag multiple functions, one soft start device can start multiple motors in sequence;
初始电压可预置,根据负载类型不同设定不同的初始电压;
The initial voltage can be preset, and different initial voltages can be set according to different load types;
停机方式分为软停机和自由停机;
The shutdown methods are divided into soft shutdown and free shutdown;
具有限流功能,使起动电流不超过设定的电流值;
Equipped with current limiting function, ensuring that the starting current does not exceed the set current value;
旁路接触器功能,起动完毕,可接通旁路接触器;
Bypass contactor function, after starting, the bypass contactor can be connected;
具有多种保护功能。
It has multiple protection functions.
本文由济南MNS低压抽屉柜友情奉献.更多有关的知识请点击: http://www.tongyuhengcheng.com 真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.
This article is dedicated by Jinan MNS low-voltage drawer cabinet. For more information, please click on: http://www.tongyuhengcheng.com Sincere attitude. We will provide you with comprehensive services. We will gradually contribute more relevant knowledge to everyone. Stay tuned
首页首页 产品产品 电话电话 置顶置顶