您好,欢迎来到济南通宇恒成自动化工程有限公司网站!

服务热线

当前位置: 首页- 新闻中心 > 业内资讯
常见问题
新闻中心

别让“铁壳子”拖垮整套电控系统

发布时间:2026-10-23 来源:http://www.tongyuhengcheng.com/ 浏览量:

很多项目把机箱机柜当低值耗材,等PLC烧了、变频器报故障才后悔:柜子不是铁皮盒子,是设备的“物理骨架”。

Many projects treat chassis and cabinets as low value consumables, and only regret it when the PLC burns out or the frequency converter reports a fault: the cabinet is not a metal box, but the "physical skeleton" of the equipment.

微信图片_202009081137222

选柜先定环境,不选颜值:

Choose the environment before selecting the cabinet, do not choose the appearance:

普通车间、控制室:九折型材PS柜,IP54够用,承重强、可并柜;

Ordinary workshop and control room: Nine fold profile PS cabinet, IP54 sufficient, strong load-bearing capacity, and can be combined into cabinets;

户外/高湿/粉尘:IP55起步,强喷淋上IP65,加防雨檐、透气阀防凝露;

Outdoor/high humidity/dust: starting from IP55, strong spray with IP65 rating, equipped with rain proof eaves and breathable valves to prevent condensation;

化工、沿海:直接304/316不锈钢,别拿冷轧板硬扛盐雾。

Chemical and coastal industries: Direct 304/316 stainless steel, do not use cold-rolled plates to withstand salt spray.

工艺看硬指标:激光切割孔位误差≤0.1mm,折弯角度±0.5°内,对角线偏差≤2mm;门缝均匀、发泡密封条连续无断点;安装板≥2.5mm镀锌板,接地端子电阻≤4Ω。表面处理走“酸洗磷化+静电喷塑”,膜厚60–80μm,盐雾500小时不起泡。

Process based hardness indicators: laser cutting hole position error ≤ 0.1mm, bending angle within ± 0.5 °, diagonal deviation ≤ 2mm; uniform door seams, continuous foam sealing strips without breakpoints; Installation plate ≥ 2.5mm galvanized plate, grounding terminal resistance ≤ 4 Ω. The surface treatment adopts "acid pickling phosphating+electrostatic spraying", with a film thickness of 60-80 μ m and no bubbles after 500 hours of salt spray.

内部别凑合:深度留足走线空间,发热件(伺服、变频)配温控风扇或热交换器;19英寸方孔条、模数化导轨,后期加模块不砸柜。多柜并排提前说清并柜补板,不然现场对不上孔位。

Don't compromise internally: leave enough space for wiring in depth, and equip heating elements (servo, frequency converter) with temperature controlled fans or heat exchangers; 19 inch square hole bar, modular guide rail, no need to smash the cabinet when adding modules later. Multiple cabinets arranged side by side should be clearly explained in advance, otherwise the holes cannot be aligned on site.

采购避坑:优先选自有激光、数控折弯、焊接产线的源头厂,能看打样、能出材质证明和IP检测报告;合同写清板厚、型材类型、防护等级、质保与易损件补发。

Procurement avoidance: Priority should be given to source factories with laser, CNC bending, and welding production lines, which can provide sample inspection, material certification, and IP testing reports; The contract specifies the thickness of the board, type of profile, protection level, warranty, and replacement of vulnerable parts.

本文由山东机箱机柜友情奉献.更多有关的知识请点击:http://www.tongyuhengcheng.com我们将会对您提出的疑问进行详细的解答,欢迎您登录网站留言.

This article is a friendly contribution from Shandong Chassis Cabinet For more information, please click: http://www.tongyuhengcheng.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message

首页首页 产品产品 电话电话 置顶置顶