对于钣金加工机柜而言其有着优良的外在形象，而长期的作业则会给其产生很大的危害，所以说对机箱机柜的钣金件机柜开展的表面解决则会给其产生很高的危害。大家都知道，机箱机柜的机壳全是用钣金件做成的。济南机箱机柜厂家在对生产加工的机箱机柜进行工程验收时要留意几个方面：

For the sheet metal processing cabinet, it has a good external brand image, and long-term operation will cause great harm to it, so the surface treatment of the sheet metal cabinet of the cabinet will cause great harm to it. As we all know, the chassis of the cabinet is made of sheet metal parts. Jinan case and cabinet manufacturer should pay attention to several aspects when carrying out engineering acceptance for the case and cabinet produced and processed:

钣金件机箱机柜不允许有人眼由此可见歪斜或部分歪、扭状况存有。架构立柱与底座平整度为小于1.5mm。检验时以底座上表面为标准，以立柱上方内缘面为测点。

No human eye is allowed to see skew or partial skew or twist in the sheet metal case cabinet. The flatness between the frame column and the base is less than 1.5mm. During inspection, the upper surface of the base shall be taken as the standard, and the inner edge surface above the column shall be taken as the measuring point.

机箱机柜顶框与底座平行度为小于1mm。检测点为底座上表面及顶框下表面，且相互之间标准。也可根据准确测量六面对角的长短，相距不可超出2.5mm来检验。有中挡板者，顶框与底座平行度可放开1.5mm，中挡板与顶框或底座平行度为小于1mm。

The parallelism between the top frame of the cabinet and the base is less than 1mm. The inspection points are the upper surface of the base and the lower surface of the top frame, and they are standard with each other. It can also be checked according to the accurate measurement of the length of the hexagonal diagonal, and the distance between them should not exceed 2.5mm. If there is a middle baffle, the parallelism between the top frame and the base can be released to 1.5mm, and the parallelism between the middle baffle and the top frame or base is less than 1mm.

上、底围框的对角之差的平方根小于1.5mm。

The square root of the difference between the diagonal angles of the upper and lower enclosure frames is less than 1.5mm.

立柱不可以有歪曲状况，各立柱与上、底框相接的两边工作交接线与框邻近平面图的平行度为小于0.5mm。

The columns shall not be distorted, and the parallelism between the working lines on both sides of the columns and the upper and bottom frames and the adjacent plan of the frame shall be less than 0.5mm.

支撑点插箱的滑轨，同一层的左、右滑轨所构成的工作台面相对性底座上表面的平行度为1mm，且应确保插箱装进后邻近两控制面板中间空隙之差的平方根不可超出0.6mm。

The parallelism of the work table formed by the left and right slide rails on the same layer of the slide rails supporting the plug-in box to the upper surface of the base is 1mm, and the square root of the difference between the two adjacent control panels after the plug-in box is installed shall not exceed 0.6mm.

江苏奇峰电气制造有限公司占地面积1800M?，一直致力于为顾客出示品质产品和技术咨询。企业将进一步健全集新产品开发、设计方案、生产制造、检验、质保期、市场销售、售后维修服务为一体的运营管理体系，并创建科学研究、健全、标准、效率的公司运行体制。

Jiangsu Qifeng Electric Manufacturing Co., Ltd. covers an area of 1800M?, We have been committed to providing customers with quality products and technical advice. The enterprise will further strengthen the operation management system integrating new product development, design scheme, production and manufacturing, inspection, warranty period, marketing and after-sales maintenance services, and create a scientific research, sound, standard and efficient company operation system.

如果您对我们的机箱机柜感兴趣或者想了解更多详细信息，欢迎点击我们的在线客服http://www.tongyuhengcheng.com与技术员咨询，或者直接拨打技术员电话咨询，我们期待您的来电洽谈！

If you are interested in our cabinet or want to know more details, please click our online customer service http://www.tongyuhengcheng.com Consult with the technician or call the technician directly. We look forward to your call to negotiate!