您好,欢迎来到济南通宇恒成自动化工程有限公司网站!

服务热线

当前位置: 首页- 新闻中心 > 业内资讯
常见问题
新闻中心

别让“薄铁皮”替你省小钱、赔大钱

发布时间:2026-11-02 来源:http://www.tongyuhengcheng.com/ 浏览量:

车间里非常容易被当耗材的,就是那台装着PLC和变频器的柜子。很多采购比价时只看长宽高和单价,结果装柜半年:门缝灌灰导致端子爬电、夏天柜内闷到70℃变频器反复跳停、想加一块继电器却发现安装梁已经锁死。这时候才明白,柜体不是外包装,是整条产线的“物理骨架”。

The cabinet in the workshop that is most easily used as consumables is the one containing the PLC and frequency converter. Many procurement comparisons only consider length, width, height, and unit price, resulting in half a year of container installation: the door gap is filled with dust, causing terminal creepage, the temperature inside the cabinet reaches 70 ℃ in summer, and the frequency converter repeatedly trips and stops. When I wanted to add a relay, I found that the installation beam was already locked. At this point, I realized that the cabinet is not the outer packaging, but the "physical skeleton" of the entire production line.

base64_image

挑这类工业柜,盯住三处就不会翻车:

Choose this type of industrial cabinet and focus on three areas to prevent it from tipping over:

骨架别用焊接框糊弄——九折或十六折型材+二次点焊,刚性是普通C型材的2倍以上,单柜承重轻松过500kg,并柜后门缝依然紧密贴合。

Don't use welded frames to paste the skeleton - nine fold or sixteen fold profiles+secondary spot welding, the rigidity is more than twice that of ordinary C-profiles, and the single cabinet can easily bear over 500kg. The door seams after cabinet merging are still tightly sealed.

板材分清楚:框架1.5–2.0mm、安装板至少2.5mm,门板1.5mm起步;表面建议走“脱脂—磷化—静电喷塑”,别信“整体1.5mm”的话术。

Clear separation of boards: frame 1.5-2.0mm, installation board at least 2.5mm, door panel starting from 1.5mm; The surface must undergo "degreasing phosphating electrostatic spraying", don't believe the saying "overall 1.5mm".

防护和散热按场景配:普通控制室IP54够用;粉尘水汽重的车间直接IP55,配发泡密封条;装了伺服和变频的柜子提前留风扇位或空调安装板,别等过热报警再砸孔。

Protection and heat dissipation are configured according to the scene: IP54 is sufficient for ordinary control rooms; The workshop with heavy dust and water vapor is directly IP55, equipped with foam sealing strips; Reserve fan slots or air conditioning mounting plates in advance for cabinets equipped with servo and frequency converters. Do not wait for overheating alarms before punching holes.

非常后一句实在话:同样叫“仿威图”,省掉一道磷化工序、偷薄0.5mm板材,出厂看不出区别,现场用一年全现原形。选型时让厂家寄一段型材小样和门板边角料,折一折、磨一下,比销售PPT管用得多。

The last word to be honest: also known as "imitation Weitu", it saves one phosphating process and steals 0.5mm thin sheet metal. There is no visible difference when it leaves the factory, and the original shape can be seen on site after one year of use. When selecting, asking the manufacturer to send a section of profile sample and door panel corner material for folding and grinding is much more effective than selling PPT.

本文由济南仿威图机柜友情奉献.更多有关的知识请点击:http://www.tongyuhengcheng.com我们将会对您提出的疑问进行详细的解答,欢迎你登录网站留言.

This article is a friendly contribution from Jinan Fangweitu Cabinet For more information, please click: http://www.tongyuhengcheng.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message

首页首页 产品产品 电话电话 置顶置顶