您好,欢迎来到济南通宇恒成自动化工程有限公司网站!

服务热线

当前位置: 首页- 新闻中心 > 业内资讯
常见问题
新闻中心

钣金加工表面处理需要注意哪些要点?

发布时间:2026-08-22 来源:http://www.tongyuhengcheng.com/ 浏览量:

1、电镀分为:镀锌(彩锌,白锌,蓝锌,黑锌),镀镍,镀铬等; 主要是在料件表面形成一层防护层,起保护及装饰的作用;

1. Electroplating is divided into: galvanizing (color zinc, white zinc, blue zinc, black zinc), nickel plating, chrome plating, etc; The main function is to form a protective layer on the surface of the material, which plays a protective and decorative role;

2、喷涂分喷漆及喷粉两种,是将料件经过前处理以后,用喷枪,气体把涂料喷到钣金工件表面上,涂料在工件表面形成涂层.烘干后,起防护的作用;

2. Spray painting can be divided into two types: spray painting and powder spraying. After pre-treatment of the material, the coating is sprayed onto the surface of the sheet metal workpiece with a spray gun and gas, forming a coating on the surface of the workpiece After drying, it has a protective effect;

3、其它的表处方式:阳出彩氧化,铬酸盐,拉丝,喷砂,氧化等;

3. Other surface treatment methods: anodizing, chromate, wire drawing, sandblasting, oxidation, etc;

IMG_20190511_162549

注意事项!

matters needing attention!

1. 所有电化学处理都应在零件状态下进行,因为处理过程中的化学溶液会被截留在组合件的缝隙之中而引起腐蚀;

1. All electrochemical treatments should be carried out in the state of the parts, as the chemical solution during the treatment process can be trapped in the gaps of the assembly and cause corrosion;

2. 点焊的零件可进行化学处理,但不能进行电化学处理(包括电镀、阳出彩化);

2. Spot welded parts can undergo chemical treatment, but cannot undergo electrochemical treatment (including electroplating and anodizing);

3. 铝合金铸件不能进行硫酸阳出彩氧化处理;

3. Aluminum alloy castings cannot undergo sulfuric acid anodizing treatment;

4. 细而长的管形(其长度大于2倍直径)零件一般不宜进行电化学处理,因为其内表面将没有膜层;(特殊情况可采取非常措施来满足要求)

4. Thin and long tubular parts (with a length greater than twice the diameter) are generally not suitable for electrochemical treatment because their inner surface will not have a film layer; (Special measures can be taken to meet the requirements in special circumstances)

5. 有较深凹槽或细孔(一般指深度大于2倍直径或开口宽度,但优良的工艺可不受此限)的零件电镀后,其内表面将不能完全覆盖镀层;

5. Parts with deep grooves or pores (generally referring to depths greater than twice the diameter or opening width, but excellent processes may not be limited to this) will not be able to fully cover the coating on their inner surface after electroplating;

本文由山东仿威图机柜友情奉献.更多有关的知识请点击:http://www.tongyuhengcheng.com真诚的态度.为您提供为多维度的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is a friendly contribution from Shandong Fangweitu Cabinet For more information, please click: http://www.tongyuhengcheng.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.


首页首页 产品产品 电话电话 置顶置顶