发布时间：2024-01-10 来源：http://www.tongyuhengcheng.com/ 浏览量：
1. The insulation cabinet of the imitation Weitu distribution cabinet is first of all based on its cabinet structure, which is still evolved from the imitation Weitu outdoor cabinet. The overall outdoor waterproofing effect is very good, and the sealing is excellent;
2. When insulated cabinets are used in the wild, they are usually located in cold northern regions, with temperatures reaching minus 20 degrees Celsius or even lower in winter! So in order to ensure the normal operation of the components inside the cabinet, it is necessary to maintain a certain temperature inside the cabinet. There are several methods. One method is to apply aluminum foil insulation cotton, with a thickness generally of 10-20mm or even thicker. This type of insulation cotton has a good insulation effect, and can also be paired with a heater and a temperature controller. The imitation Weitu heater and temperature controller produced by Taiyu can be used together. After the temperature controller is set, when the ambient temperature reaches the set temperature value, the heater will start working, and the temperature inside the cabinet will gradually increase.
3. Some insulation cabinets are not equipped with components when used in the wild, but with water pipes, pressure gauges, valves, etc. inside. This is also the operation of water stations, and perhaps other water treatment system equipment. In winter, the temperature is low and the water pipes cannot freeze. At this time, it is also necessary to insulate or heat the cabinet.
4. When manufacturing imitation Weitu cabinets (insulation cabinets), it is important to note that the interior of the cabinet should be as flat as possible. Except for unnecessary grounding screws, other screws and screws should be prevented as much as possible. The flatter the interior, the more convenient it is to apply insulation cotton later on, and the better the insulation effect. Not even requiring the use of outdoor cabinet air conditioning or heat exchangers.
5. Imitation of Weitu outdoor junction boxes can also be used for insulation structures, and the principle is the same. However, the wall mounted accessories on the opposite side need to be directly welded on, and the AE box wall mounted accessories in general specifications cannot be used
6. Other cabinet types, such as imitation Weituqin style operation console, PC computer cabinet, industrial computer control cabinet, aluminum alloy cantilever system, waterproof terminal box, PS 90 fold profile cabinet, Weituo electrical cabinet, etc., can also be considered for insulation structure. However, the manufacturing process may be more complex, which depends on the detailed on-site environmental requirements.
This article is a friendly contribution from Shandong Fangweitu Cabinet. For more related knowledge, please click: http://www.zhongtuopower.cn We will provide you with comprehensive service with a sincere attitude. We will gradually contribute more relevant knowledge to everyone. Stay tuned