仿威图柜就是配电柜的一种，由于有些配电柜较大所以组装起来比较麻烦，在组装时常有一些细节是我们不注意的。因此我们在安装时必须要注意一些细节问题。下面小编就为大家介绍一些通宇恒成加工安装时要注意的细节问题：

　　Imitation Weitu cabinet is a type of distribution cabinet. Due to the large size of some distribution cabinets, it is difficult to assemble them, and there are often some details that we do not pay attention to during assembly. Therefore, we must pay attention to some details during installation. Below, the editor will introduce some details to pay attention to when processing and installing Tongyu Hengcheng:

　　1.安装嵌条：已打好装配孔的嵌条垂直焊接在操作台门的两侧，使用M4自攻螺丝，方便安装。

　　1. Installation of embedded strips: The embedded strips with assembly holes have been vertically welded on both sides of the control panel door, using M4 self tapping screws for easy installation.

　　2.密封胶条：仿威图柜的技术指标,三元乙丙密封胶条密封性能可靠。

　　2. Sealing strip: The technical specifications of the imitation Weitu cabinet indicate that the sealing performance of the EPDM sealing strip is reliable.

　　3.门使用销钉式铰链，可开启110°。

　　3. The door uses a pin type hinge that can be opened 110 degrees.

　　4.槽型箱边：防止灰尘和水进入箱内，并能够完好地与密封圈配合，形成对箱内的防护。

　　4. Groove shaped box edge: prevents dust and water from entering the box, and can be perfectly matched with the sealing ring to form protection for the box.

　　5.底部采用凸台盖板或海绵进线夹进线。

　　5. The bottom adopts a convex cover plate or sponge wire clamp for wire entry.

　　6.操作台盖板采用液压支撑杆支撑，方便开启。

　　6. The control panel cover is supported by hydraulic support rods for easy opening.

　　以上就是关于仿威图柜加工安装的注意事项的介绍，希望能帮到大家！

　　The above is an introduction to the precautions for processing and installing imitation Weitu cabinets. I hope it can be helpful to everyone!

　　本文由 济南仿威图柜  友情奉献.更多有关的知识请点击  http://www.tongyuhengcheng.com/   真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Jinan Fangweitu Cabinet For more related knowledge, please click http://www.tongyuhengcheng.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.