发布时间：2023-12-21 来源：http://www.tongyuhengcheng.com/ 浏览量：
During the use of our chassis and cabinet products, in order to ensure their normal use in harsh environments, we need to carry out process treatment to ensure that the chassis and cabinet can be used in any environment for a long time.
When it comes to the process treatment of chassis and cabinets, after the chassis and cabinets are formed, some effective treatment is needed. So, what other processes are needed for them after forming? Let's learn together below.
All products require effective treatment after molding. Firstly, we need to treat their outer layer. Only when the outer layer is properly treated can its lifespan be extended and performance improved.
Spray painting and electroplating treatment are commonly used methods for surface treatment of chassis and cabinets. Their function is to prevent rust, static electricity, and also to form a protective film. When not all surfaces of the chassis and cabinet are required to be sprayed and electroplated. Generally, high-quality chassis and cabinets are less painted inside.
Not only the surface treatment of the chassis and cabinet, but also good heat dissipation is very important for the chassis and cabinet. However, the heat dissipation of the chassis and cabinet cannot be separated from the fan. Consider the configuration of the fan based on the amount of heat generated by the device you put in. Generally speaking, there are two to four fans on the top of the chassis cabinet, and the side wall fan should be installed on the back wall of the chassis cabinet. Why do we do this? The reason is that a large amount of heat is generated at the back of the equipment, so the side wall fan needs to be installed on the back wall of the chassis cabinet in order to timely dissipate the heat.
The surface treatment and heat dissipation treatment are particularly important for the chassis and cabinet, and if they are done well, the performance of the distribution box will be stronger.
新闻 / NEWS RECOMMENDATIONS