您好,欢迎来到济南通宇恒成自动化工程有限公司网站!
电话

服务热线

服务热线

当前位置: 首页- 新闻中心 > 业内资讯 >
常见问题
新闻中心

威图机柜讲焊接加工注意事项!

发布时间:2021-07-16 来源:http://www.tongyuhengcheng.com/ 浏览量:

在仿威图机柜生产过程中,焊接是必 须的工序之一。要保证这道工序的加工质量就要注意以下几点。
Welding is one of the necessary processes in the production process of imitative Rittal cabinet. To ensure the processing quality of this process, we should pay attention to the following points.
焊接前的准备工作:焊接劳动保护用品要穿戴整齐,对焊接设备、焊条等进行检查,是否符合规定要求,有无运转不灵的问题;焊件上的铁锈、油脂及水分等,应清除洁净。
Preparation before welding: the welding labor protection articles should be dressed neatly, and the welding equipment and welding rod should be checked to see whether they meet the requirements and whether they are not working properly; Rust, grease and moisture on weldment shall be removed and cleaned.
             仿威图机柜厂家
预处理焊缝坡口的底子尺度:焊缝坡口要合理,这样才能够确保尺度精度,以削减焊接变形
Basic dimension of pre-treatment weld groove: weld groove should be reasonable, so as to ensure the scale accuracy and reduce welding deformation
核准工艺参数:焊接的工艺参数,主要有焊条直径、焊接电流、焊接电压以及焊接速度等
Approved process parameters: welding process parameters, mainly including electrode diameter, welding current, welding voltage and welding speed
要充分了解焊接的结构:焊条应能够确保进入焊接区,并且要歪斜45度才行。在焊接时,不允许进行长焊缝接连焊接,应进行交替断续焊接,避免呈现热变形,影响焊缝的焊接质量。
To fully understand the welding structure: the electrode should be able to enter the welding area, and to skew 45 degrees. During welding, it is not allowed to carry out continuous welding of long welds, but intermittent welding should be carried out alternately to avoid thermal deformation and affect the welding quality of welds.
首页首页 产品产品 电话电话 置顶置顶