您好,欢迎来到济南通宇恒成自动化工程有限公司网站!
电话

服务热线

服务热线

当前位置: 首页- 新闻中心 > 公司动态 >
常见问题
新闻中心

钣金加工机箱机柜作用及外壳衡量标准!

发布时间:2021-06-23 来源:http://www.tongyuhengcheng.com/ 浏览量:

在生产使用中,机箱机柜一般是达到保护的效果,但是其侧重 点不一,所以其外形和运用的方面也有所不同,但是不管有何种区别,机箱机柜总的来说都会达到以下几点的作用。
In production and use, the cabinet of the chassis generally achieves the protection effect, but its emphasis is different, so its appearance and application are different, but no matter what difference, the cabinet will achieve the following functions in general.
首先,要达到的一个效果就是提供空间给电源、主板等着这些重要但又比较零散易受影响并且易于出现故障的部件。
First, one effect to achieve is to provide space for power supply, motherboard and other important but relatively scattered and vulnerable parts prone to failure.
其次,由于其内部部件容易受环境的影响,所以自动售货机还要起到保护的作用,如防压、防尘、防冲击同时还有防电磁干扰和辐射的功能。
Secondly, because the internal parts of the vending machine are easily affected by the environment, the vending machine also plays a protective role, such as pressure prevention, dust prevention, impact protection, and also the functions of electromagnetic interference and radiation protection.
                         济南机箱机柜
然后,自动售货机还供给了许多便于运用的面板开关指示灯等,让操作者更方便地操作微机或调查微机的运转状况。
Then, the vending machine also provides many easy to use panel switch indicator lights, so that the operator can operate the computer more conveniently or investigate the operation of the microcomputer.
机箱机柜外壳衡量有何标准:
What are the standards for the measurement of the enclosure of the chassis:
1.机箱机柜钣金加工一切A级面不能有任何的刮伤、划痕和杂质。
1. all grade A surfaces of the sheet metal processing of the cabinet shall not be scratched, scratched and impurity.
2.机箱机柜各种外表处置色彩需求均匀,无目视色差;丝印有些无断线、锯齿高低不平等不好的表象。
2. the color requirements of various exterior disposal of cabinet are uniform without visual color difference; Silk screen printing some of the non broken lines, the level of the jagged uneven appearance.
3.机箱机柜C级面不能有深划痕,对浅划痕不约束。
3. the C-level surface of the cabinet shall not have deep scratches and shall not be restricted to the shallow scratches.
4.机箱机柜B级面需要有未伤底材的浅划痕但单面数量不答应超越5条。
4. the cabinet B surface needs to have shallow scratch without damage to the bottom material, but the number of single side is not allowed to exceed 5.
首页首页 产品产品 电话电话 置顶置顶